IBM 2109-S08, 8 Porturi Fibra, Management serial si RJ-45, 2 Surse redundante
Detalii
General
- Fibre-channel protocol American National Standards Institute (ANSI) - fibre-channel ANSI Standard (FC-PH) - Fabric initialization Complies with FC-SW 3.2 - Internet protocol (IP) overfibre-channel (FC-IP) - Complies with 2.3 of the FCA profile - System architecture: Nonblocking shared-memory switch - System processor: Superscalar 33-Mhz Intel i960RP - Number of fibre-channel ports: x8 - Fibre-channel port speed: 1.0625 GBps full duplex - Aggregate switch input/output (I/O) bandwidth: 8 GBps, full duplex - Frame buffers: 16 buffers per port at 2112 bytes per frame - Fabric latency: - Data transmission range: Up to 500 m (1640 ft) for short wavelength optical link, Up to 10 km (32 808 ft) for long wavelength optical link - Chassis types: Back-to-front airflow (power supply out front)
Specificatii tehnice
- Fabric management Simple name server, alias server, simple network management protocol (SNMP), Telnet, World Wide Web - User interface RJ-45 front panel connector for 10BASE-T or 100BASE-T Ethernet or in-band - Serial port Local front panel RS-232 port for recovering factory settings
Optical port specifications
- Fibre-channel interfaces of a 2109 Model S08 Switch system equipped with an optical port interface uses a short wavelength (780 to 850 nm) or long wavelength - (1270 to 1350 nm) laser transmitter. - The laser complies with 21 CFR(J) class 1 - laser safety requirements. It uses non-open fibre control (OFC) optical GBICs in the - switch circuit. Limiting the optical power emitted by the port guarantees safe class 1 - operation, thereby eliminating the need for physical shutters. - The optical GBIC uses the duplex-session control (SC) connector scheme.
Rack-mount dimensiuni
- v 1U, 483 mm (19 in.) rack mount Electronic Industries Association (EIA) - compliant. - v Height: 43.4 mm (1.71 in.), Width: 428.6 mm (16.88 in.), Depth: 450.0 mm (17.72 - in.) Tabletop dimensiuni: v H: 43.4 mm (1.86 in.), W: 428.6 mm (16.88 in.), D: 450.0 mm (17.72 in.)
Greutate
7.73 kg (17 pounds)
Surse alimentare:
Putere totala
110 W
Input
85 - 265 V ac
Input line frequency
47 - 63 Hz.
Inrush current
10 A peak, >300 μs for a hot or cold start
Harmonic distortion
Active power factor correction per IEC1000-3-2
Input line protection
Fused in both hot and neutral lines
Maximum dimensions
Width: 89 mm (3.5 in.) Height: 38 mm (1.5 in.) Length: 279mm (11 in.)
Redundancy
Dual supplies, Hot pluggable
BTU rating
110 W x 3.412 BTU per hr per W = 375 BTU per hr
Etichete produs
Foloseste spatii intre etichete. Foloseste ghilimele simple (') pentru fraze.